| |
The CMRE 540 big
block Chevy engine package is just the
ticket for the weekend sportsman racer
looking for a maximum performance and low
maintenance engine combination.
We have made no
compromises in components or workmanship
in order to achieve these goals.
This engine dynos
892 HP @ 6900 RPM with 764 ft-lbs of
torque at 5300 RPM.
Engine parts:
* Block, Merlin 10.200
tall deck
*Crankshaft, BRC 4340, 4.250 stroke
*Pistons, BRC light weight custom
dome, 1.395 comp. ht.
*Ring package, plasma
*Rods, custom Childs & Albert
aluminum 150 series
*Main bearings, King Race
*Rod bearings, King Race
*Cam bearings, Sealed Power
*Oil pump, Canton, pressure balanced-
anti-cavitation racing pump
*Oil pan, Canton wet sump- 7 quart-
stroker power pan.
*Oil pick up, Canton
*Camshaft, Comp. CMRE custom grind -
steel billet
*Lifters, Comp. roller
*Timing set, Speed Pro wide link
*Heads, Dart 360 Aluminum
*Valves int., 2.300 severe duty pro flow
*Valves ex., 1.900 severe duty pro flow
*Springs, Comp.
*Retainers, Comp. titanium
*Locks, Comp. 10 degree
*Rocker arms, Comp. stainless
*Pushrods, Comp custom Hi-Tech
*Rocker arm studs, CMRE
*Guide plates, Comp.
* Gaskets, Felpro Race
* Head studs, ARP u/cut
* Damper, Fluidamper - 6.250 -
internal
* Intake manifold, Dart 1x4 4150 - 10.200
deck ht.
Parts total $12,012.84
Labor:
*Pressure test block
* Mill block & set
deck clearance
*Bore & power hone
block with torque plate
*Balance assy.
*Pressure test heads
*Competition valve job
*Port work & flow
testing
*Flat mill heads
*Install bronze liners
*Install cam bearings
*Check piston to valve
clearance
*Check rod to block
clearance
*Degree camshaft
*Set piston ring gap
*Check & set
bearing clearance
*Clean block for finial
assembly
*Assemble engine
*Dyno test & tune
engine
Labor $2,443.00
Total estimate for for
engine (less accessories) $14,455.84
This combination dynos
about 900 hp. with a 4500 carb.
Steel rods can be
substituted for an additional $200.00.
|
|
