Coy Miller Race Engines
468 BBC SPORTSMAN PACKAGE

 
       
     
       
     
       
     
   
 
     
 

 The CMRE 468 big block Chevy engine package is a scaled down version of our competition class engine program, that is geared  towards the weekend hobby racer.

As you can see there has been no compromise in parts or labor operations, unlike some other  budget engines that don't even list the parts or labor operations.

We will tell you up front we don't try to build the cheapest engine, but rather the highest quality engine per dollar invested.         

Engine parts:                           

* Block, Merlin                   
*Crankshaft, Eagle 4130, 4.0 stroke         
*Pistons, BRC  light weight custom dome       
*Ring package, Speed Pro plasma           
*Rods, Eagle 6.535 H beam 4340 steel       
*Main bearings, Clevite 77                   
*Rod bearings, Clevite 77     
*Cam bearings, Sealed Power                   
*Oil pump, Canton, pressure balanced- anti-cavitation racing pump     
*Oil pan, Canton wet sump- 7 quart-  power pan.     
*Oil pick up, Canton     
*Camshaft, Comp. CMRE custom grind -  steel billet                         
*Lifters, Comp. roller     
*Timing set, Speed Pro wide link                           
*Heads, Merlin VR 345 CC   
*Valves int., 2.300 severe duty pro flow   
*Valves ex., 1.900 severe duty pro flow.     
*Springs, Comp.     
*Retainers, Comp.  titanium     
*Locks, Comp. 10 degree     
*Rocker arms, Comp. stainless                                                           
*Pushrods, Comp custom Hi-Tech   
*Rocker arm studs, CMRE     
*Guide plates, Comp.     
* Gaskets, Felpro Race                         
* Head studs, ARP u/cut         
* Damper, Fluidamper -  6.250 - internal                         
* Intake manifold, Dart 1x4 4150 - 10.200 dh.

Parts total $ 8, 556.78

 

Labor:

*Pressure test block

* Mill block & set deck clearance

*Bore & power hone block with torque plate

*Balance assy.

*Pressure test heads

*Competition valve job

*Sportsman Port work & flow testing

*Flat mill heads

*Install bronze liners

*Install cam bearings

*Check piston to valve clearance

*Check rod to block clearance

*Degree camshaft

*Set piston ring gap

*Check & set bearing clearance

*Clean block for finial assembly

*Assemble engine

*Dyno test & tune engine

Labor total $2,585.50

 

Total engine package (less accessories) $11,142.28

This combination dynos about 750 hp. with a 4500 carb.

This engine package is available with Merlin VR aluminum heads for $11,722.78