Competition Machine Shop

Racing Engines & Components  

Cylinder Head Development

Computerized Dyno Facility 

1046 Moore Street,   Harrisonburg, VA 22802  

 

   Phone: (540)433-0545           

---

 Our primary business is research, development and building racing engines.  

Selling parts is time intensive and often unprofitable so  we request a minimum order of  $500 except for customers with CMRE engines. 

 

Ford 3.8 V6 Engine Parts

 

Internal  Engine Parts - Ford 3.8 V6

• Pistons, forged, custom reverse dome, 3.831" bore Stage I or II ( stage II requires stage II rods)      $599.00
• Ring package, plasma top, Stage II     $229.00
• Ring package, Stage I       $124.95
• Connecting Rods, Stage II   4340 steel with 8740 cap screw, 705 grams (requires Stage II bearings)   $579.00
• Main bearings     $42.00
• Rod bearings Stage I     $32.00
• Rod bearings Stage II     $50.00
• Cam bearings     $34.00
• Oil pump, (new timing cover & oil pump body )      $345.95
• Oil Stick Assembly     $30.95
• CMRE 6061 custom main girdle ( requires CMRE matching main stud kit )   $350.00
• Camshaft, CMRE custom grind - Stage I or II, hydraulic roller (customer supplied core)   $165.00
• Lifters, CMRE hyd roller   $169.00
• Timing set, CMRE wide link   $54.00
• Timing chain tensioner   $20.00
• Valve guides, phosphor bronze   $36.00
• Valve Seats (machining required)    $54.00
• Valves int., stainless steel, 1.85, NK 842 material (machining required ) $149.00
• Valves ex., stainless steel, 1.625, XH 426 material (machining required ) $149.00
• Springs, Comp. dual assemblies  (m achining Required)     $145.00
• Retainers, Comp. Titanium $119.00
• Spring cups (machining required) $45.00
• Locks, Comp. 10 degree $25.00
• Valve seals, positive type, teflon $22.00
• Roller rocker arm set, CMRE Stage II Hi Tech stainless, adjustable ( cylinder head machining required) $300.00
• Roller rocker arm set 1.73 ratio, race quality extruded aluminum, bolt-on, non-adjustable, (for use with stock cams)      $299.00
• Roller rocker arm set, CMRE Stage 1 Roller Tip (cylinder head machining required) $164.95
• Pushrods, custom CMRE 4130 seamless chrome-moly    $129.00
• Rocker arm studs, (machining required)     $79.00
• Guide plates, CMRE custom (cylinder head machining required)   $49.00
• Water Pump (new)      $72.34
• O Ring Wire  $10.00
• Main Studs (custom for use with CMRE main girdle) 190,000 psi     $139.00
• ARP Main Studs 190,000 psi, 12mm, with 12pr nuts, HD washers     $129.00 set
• ARP Head Studs 190,000 psi tensile strength 11mm with 12pt nuts, HD washers      $129.00 set
• ARP Rod Bolts 190,000 psi tensile strength (9mm)    $89.00 set
• ARP Rocker Studs, 170,000 psi tensile strength (3/8"-7/16") (for stud mounted rockers)   $89.00 set
• Fel-Pro gasket set, upper engine set, with late design head gaskets ('89-'95) $140.00
• Fel-Pro gasket set, lower engine set, ('89-'95)     $65.00
• Fel-Pro gasket set, complete engine, upper & lower ('89-'95)   $195.00

Above parts are used in CMRE Stage I and Stage II engine builds.

Some parts bolt on, but others require machine work to properly utilize them.

Induction  Components - Ford Super Coupe:

• Magnum Powers Hi-Flo Inlet Plenum     $499

• Magnum Powers Hi-Flo Inlet Plenum EGR Adapter  $40

• Fresh-Air Induction System, includes K&N 9" Cone Filter, March Ram-Air box, 3" inlet tube with pcv fitting,     $179.00

• C & L / Vortech 73mm Max-Flow Mass Air Meter (30, 36, 38 or 42 lb. sampling tube)  $189.00

• Replacement Sampling Tubes     $40.00

• Pro-M 77mm MAF Custom calibrated module, with inlet tube     $499.00

• Pro-M 75mm MAF Custom calibrated module Chrome Bolt-on $209.00

• Pro-M 75mm MAF Custom calibrated module Black Plastic Bolt-on $199.00

• BBK Throttle Body with SC linkage 70mm      $259.00

• BBK Throttle Body with SC linkage 75mm      $269.00

• K&N Lifetime Panel Air Filter drop-in replacement $42.00

• K&N 9" Conical Filter, clamps to Mass Air Meter $38.00

Supercharger  Components - Ford Super Coupe:

• Eaton-Magnuson Products S-Model Hi-Flow Supercharger   $1450.00  (exchange)

• Magnum Supercharger Adapter Air Outlet 3/4" raise, (with new castings)   $315.00

• Above Adapter with  CMRE Airflow Modifications   $450

• OTC Spanner Nut Wrench for removing and installing supercharger adapter tops  $59.00

• Blower Pulleys 5% or 10% Overdrive ratio    $60.00

• 3-piece Accessory Underdrive ratio pulley set (alternator, crankshaft, water pump)   $179.00

• 8" Lo-Profile  800cfm  Hi-Flo Intercooler Fan    $99.00

• Spearco Hi-Flo Intercooler - with custom aluminum inlet duct  (exchange only)   $750.00

• "Double-Intercooler" with ported inlet & outlet flanges  (exchange only)      $900.00

Cooling   Components - Ford 3.8 V6:

• Griffin High Capacity Aluminum Radiator, race quality, direct fit  ( 50% increase in capacity)    automatic transmission  $595        manual transmission  $525

• Robert Shaw Hi Performance Thermostats (180 or 195 degree) with Fel-Pro Gasket   $10.00

• Pressure Release Radiator Caps     $12.00

Fuel  Components - Ford 3.8 V6:

• Hi-Flo Fuel Pumps, with Filter Screen, direct fit:

                                        190 lph     $119.00

                                        250 lph     $149.00

• Vortech T-Rex In-line Pump 60 gal/hr @ 70psi with wiring & instructions   (recommended when NO2 is used )            $299.00

• Adjustable Fuel Pressure Regulator 100.00

• Hi-Flo Fuel Injectors, set of 6:

Bosch 36 lb / hr     $359.00

                                        Lucas 38 lb / hr     $399.00

                                        Lucas 42 lb / hr     $449.00

Exhaust   Components - Ford 3.8 V6:

• Short Tube Stage I Headers with 1-3/4" primaries and 2-1/2" collectors     $499

• Long Tube Stage II Headers with 1-7/8" primaries and 3" collectors     $584.95

                Add    $ 35.00   for EGR fittings 

                Add   $300.00   for 304 Stainless Steel Header Material

                Add   $116.00   for 1300 Degree Jet Hot Header Coatings

                Add   $275.00   for 2000 Degree Jet Hot Header Coatings

• 2-1/2" down-tubes for headers with O2 fitting and hi-flo converters   $250.00

                 Above without converters   $150.00

• Dual 2-1/2" into 3" into dual 2-1/2" cat-back exhaust system including Magnaflo resonator, 2 Dynamax Super Turbos. ( uses factory hangers)     $749.00

• Dual 2-1/2" into 3-1/2" into dual 2-1/2" cat-back exhaust system without resonator ,includes 2 Dynamax Super Turbos  (pre 92 models require a 92-up gas tank)        $749.00

•  Stage II     3-1/2" resonator  $172.95

• Magnaflo resonator dual-inlet, single outlet     $119.00

• Hi-Flo   2-1/2" catalytic converter    $75.00

 

Components on this page may or may not be street legal where you are located,  so  we sell them as suitable for "Off-Road Use" only.

 Phone: (540)433-0545